Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

堆积阶地古老滑坡识别方法及其在线状工程地质勘察中的应用     

安玉科  樊江  马胜午  马建全  高娟  毛立军 《吉林大学学报(地球科学版)》2020,50(6):1787-1794

阶地型古老滑坡体形成后，长期受各种营力影响，导致古老滑坡地貌形态破坏严重甚至消失。目前遥感技术和普通工程地质调绘很难发现这些滑坡的存在，给工程建设和后期运营造成较大安全隐患。为准确识别形态特征不明显的古老滑坡体，从阶地物质结构特征演变入手，找到阶地受剪切破坏产生的典型物质结构特征，将地层结构错断、卵砾石异常定向排列、摩擦镜面和泥包粒的眼球构造等作为滑坡准确识别依据。首先采用沿沟谷进行工程地质测绘的纵横交错追踪法确定滑坡体纵向范围和滑面形状，再结合地貌特征推测各级、块滑坡平面范围和分布，最后用点状勘探工程验证和校正推测结论。可将其总结为由"地貌异常、沿沟追踪、面上推断、点状校验"组成的阶地型滑坡识别方法，即物质结构异常推断法。结合线状工程勘察设计各阶段工作特点，提出线状工程前期工作中阶地型滑坡识别步骤，并在临渭高速公路工程建设项目中取得成功应用。  相似文献   

Supply and Demand Levels for Livestock and Poultry Products in the Chinese Mainland and the Potential Demand for Feed Grains     

HUANG Shaolin  LIU Aimin  LU Chunxia  MA Beibei 《资源与生态学报(英文版)》2020,11(5):475-482

The widening gap between the supply and demand levels for livestock and poultry products in the Chinese mainland poses a significant challenge to the secure supply of feed grains. Therefore, the accurate prediction of the demand potential for feed grains represents a key scientific issue for ensuring food security in the Chinese mainland. This study is based on an analysis of several factors, such as the Chinese mainland’s output, trade volume, apparent consumption of livestock and poultry products, and two different scenarios for predicting the future demand for feed grains are assessed. The results indicate that output and consumption of livestock and poultry products, as well as the country’s trade deficit and the pressure of the supply and demand balance with respect to these products, have been increasing in recent years. The analysis predicts that the demand for feed grains in the Chinese mainland will reach 425.5 or 389.6 million tons in 2030 based on the two scenarios. This finding indicates that with the increasing demand for livestock and poultry products in the Chinese mainland, the demand for feed grains will continue to increase, and the shortfall in feed grains and raw materials will expand further, especially dependence on external sources of protein-rich feed grains will remain high.  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献   

基于碳、氮稳定同位素的雅浦海沟底栖生物食物来源和营养级初探     

郭承秧  杨志  陈建芳  郑豪  张东声  冉莉华  王春生  鹿博  陈倩娜 《海洋学报》2018,40(10):51-60

为了分析雅浦海沟中底栖生物群落的食物来源和营养级，本研究分析了雅浦海沟真光层中浮游植物和浮游动物、海底沉积物和巨型底栖生物（海绵、海参、海蛇尾、海星、海葵和钩虾）中的碳、氮稳定同位素组成。研究发现雅浦海沟真光层中的浮游植物和浮游动物δ13C值[（-22.8±0.4）‰和（-21.8±0.8）‰]和δ15N值[（5.4±0.4）‰和（6.8±0.2）‰]与巨型底栖生物的δ13C值（-20.1‰~-16.8‰）和δ15N值（11.9‰~17.9‰）的差异超过了一个营养级，表明作为底栖生物的初始食物来源的浮游植物和浮游动物在向下输送的过程中经历了食物链传递和细菌的降解。巨型底栖生物的δ15N和δ13C值之间无显著的相关性，此外不同物种之间营养级也存在明显差异，表现为海绵的营养级相对较高（3.4~4.7），海参（3.3~3.6）、海蛇尾（3.4~3.5）和海星（3.2~3.7）的营养级较为接近，钩虾（2.9~3.3）和海葵（3.1）的营养级则相对略低，反映了底栖生物不同物种之间食物来源的多样化。  相似文献   

The 1‐million‐year‐old quartz assemblage from Pont‐de‐Lavaud (Centre,France) in the European context          下载免费PDF全文

Jackie Despriée  Marie‐Hélène Moncel  Marta Arzarello  Gilles Courcimault  Pierre Voinchet  Jean‐Jacques Bahain  Christophe Falguères 《第四纪科学杂志》2018,33(6):639-661

  相似文献   

基于熵权TOPSIS模型的海岛地区资源环境承载力研究——以舟山普陀区、定海区为例   总被引：2，自引：0，他引：2  

徐文斌  郭灿文  王晶  程义远  徐鹏杰  张宏晔 《海洋通报》2018,(1):9-16

随着海洋强国、"一带一路"、生态文明建设等国家战略的不断推进,海岛在国家政治、军事、经济、社会、生态中的地位不断提高,海岛开发、利用的规模越来越大,其生态保护也面临着新的挑战。本文依据资源环境承载力内涵,兼顾海岛资源环境特点,研究形成海岛地区资源环境承载力评价指标体系,综合应用熵权法、TOPSIS(逼近理想解排序方法)模型评价了典型海岛地区——普陀区与定海区2009-2015年间的资源环境承载力状况,结果表明:普陀和定海资源环境承载力水平呈稳步提升趋势,各个时期的环境保护政策和节能减排相关措施在环境保护与污染治理等方面起到了较为积极的作用。最后,在基于生态系统的海岛综合管理框架内提出了对策建议。  相似文献   

江苏重点海域绿潮漂移扩散数值模拟   总被引：1，自引：0，他引：1  

吉会峰  刘吉堂  莫旭冬  高鑫鑫  杨波 《海洋科学》2018,42(5):82-91

江苏海域是绿潮灾害的多发海域,本文利用MIKE3模型建立了江苏辐射沙洲重点海域三维水动力模型,并采用实测资料对模型进行验证和率定;在水动力模型的基础上建立绿潮漂移扩散模型,对江苏海域绿潮漂移路径进行了模拟并与卫星遥感监测的结果进行对比。对比结果表明,模型24 h和48 h模拟结果与卫星遥感图像分析结果较吻合,模型能为江苏海域绿潮的预警预报提供一定参考。  相似文献   

海岸破波带内悬沙空间分布试验研究和解析表达式     

张洋  邹志利  孙大鹏  薛武山 《海洋工程》2018,36(1):28-46

关于海岸破波带内悬沙浓度水平和垂向分布的研究对于计算海岸输沙率和地形演变具有重要意义。本研究进行了规则波、波群和不规则波三种波浪情况破波带内悬沙浓度的水平和垂向分布的试验测量。试验在大尺度波浪水槽进行,接近实际海岸波况尺度。给出了破波带内多断面悬沙垂向分布的细致测量结果,并以此为基础给出了预报实际海岸破波带内悬沙浓度水平和垂向分布解析表达式,讨论了形成这些分布的物理原因和不同波况、不同破波带区域对分布的影响。  相似文献   

高温高压条件下彭灌杂岩的强度对汶川地震发震机制的启示   总被引：1，自引：1，他引：0       下载免费PDF全文

牛露  周永胜  姚文明  邵同宾  马玺  党嘉祥  何昌荣 《地球物理学报》2018,61(5):1728-1740

采用汶川地震震源区彭灌杂岩中代表性细粒花岗岩样品，在固体围压介质三轴实验系统上开展了高温高压流变实验研究.实验的温度和压力条件按照龙门山断层带5~30 km深度对应的温度和压力（静岩压）设定.利用偏光显微镜和扫描电镜对实验样品进行微观结构观察.实验结果表明，实验样品在10~20 km深度都具有很高的强度，彭灌杂岩在该深度处于脆性破裂-脆塑性转化域，而在20~30 km实验样品强度显著降低，彭灌杂岩进入塑性流变域，这与流变结构中的极限强度很接近.以花岗岩为代表的彭灌杂岩的破裂强度决定了中上地壳的强度，在15~20 km深度不仅强度达到最大值，而且控制了断层不稳定滑动，具备地震成核条件.因此，把彭灌杂岩强度随深度变化规律与流变结构和滑动稳定性参数（a-b）结合起来得出，彭灌杂岩在15~20 km的高强度是汶川地震的孕育和发生的必要条件.  相似文献